On Bosch washers, E17 or F17 usually points to a fill problem and E18 or F18 to a drain problem. F16 is a door fault, F21 a drum drive issue and F23 a leak protection alert on models that have it.
Bosch washers show a short code when something is wrong. Depending on the model series the code starts with E or F, which confuses people, because the same fault can appear under either letter.
The table below is a general reference to help you decide what to check before calling a technician.
| Code | What it usually means | First thing to check |
|---|---|---|
| E17 / F17 | Water is not filling, or filling too slowly | Tap open, inlet hose not kinked, inlet filter clean |
| E18 / F18 | Water is not draining in time | Drain filter, drain hose and pump |
| F16 | Door not detected as closed | Close the door firmly and check the seal |
| F21 | Drum drive problem | Remove part of the load and restart; if it repeats, book a visit |
| F23 | Leak protection triggered on models that have it | Unplug the machine and check for water in the base |
The same code can have more than one cause, and codes vary between Bosch model series. Check your manual, or send us the code and the model number.
A code that repeats after the simple checks usually means a part needs replacing, such as the drain pump, the inlet valve or a door lock. F21 and F23 especially should be looked at by someone, not reset again and again.
You can also try our error code finder or read about Bosch washing machine repair in Riyadh.
E18 usually means the machine could not drain the water in time. Check the drain filter and hose first. If it returns, the pump may need replacing.
Both usually point to a water fill problem. Which one you see depends on the model series.
Switching the machine off and on can clear a one-off code. If it returns, the fault is still there.