On Samsung washers, 4E or 4C means a water supply problem, 5E or 5C a drain problem, dE or dC a door error and UE or UC an unbalanced load.
Samsung codes are short and, once you know them, quite specific. Four of them cover most of what people ask us about. Here is what each means and what to check first.
| Code | What it usually means | What to try first |
|---|---|---|
| 4E / 4C | Water supply problem | Open the tap fully, check the hose, clean the inlet filter |
| 5E / 5C | Water is not draining | Check the drain hose and clean the pump filter |
| dE / dC | Door not detected as closed | Close firmly, clear the seal, try again |
| UE / UC | Unbalanced load | Spread the clothes out and restart |
Other codes you may see on some models include 1E (a water level sensor problem) and 3E (a motor sensor problem). They usually need a technician.
First, a 4E can be as simple as a tap that was turned off after a plumber visited, so check that before anything else. Second, a 5E that returns every few cycles is a warning that the pump is struggling. Deal with it before it fails completely. Third, a dE is sometimes a sock in the seal. Look before you replace anything.
If a code keeps returning after those checks, call or WhatsApp +966 55 939 1603 with the code and the model number. See Samsung washing machine repair in Riyadh and the error code finder.
4E is a water supply error. Check the tap, the hose and the inlet filter.
5E is a drain error. Clean the pump filter and check the hose.
The load is unbalanced. If it happens with small loads, the machine may not be level or the suspension may be worn.
Not sure what your error code means? Try our washing machine error code finder.