A washing machine that will not fill is usually a closed tap, a kinked inlet hose or a blocked inlet filter. If those are clear, the inlet valve may have failed.
The drum stays dry, or it fills so slowly the cycle stalls. That usually points to the supply side: the water is not getting into the machine, or not fast enough.
Here is what to check, and when it is time for a visit.
If the tap, the hose and the filter are all clear, the inlet valve is the next suspect. It opens and closes electrically, so it can fail even when the water supply is perfect. A door lock fault or a water level sensor fault can stop the fill too. Those need a technician, so please unplug the machine and do not open any panels.
Call or WhatsApp +966 55 939 1603 with the brand and the code, if there is one. Our repair page has more, and so does the error code finder.
The usual causes are a closed tap, a kinked hose, a blocked inlet filter or a faulty inlet valve.
Yes, if the machine is unplugged and the tap is closed. Keep a towel ready because a little water will come out of the hose.
Slow filling often points to low water pressure or a partly blocked inlet filter. Clean the filter first, then call if it stays slow.