We repair Bosch front load and top load washing machines at your home in Riyadh: drain, fill, spin, leak and error-code faults.
Bosch washers have a reputation for running quietly, which makes it all the more annoying when one stops with a short code and a drum full of water. Bosch machines tell you something is wrong with a letter and a number, usually E or F followed by two digits.
Call or WhatsApp +966 55 939 1603 with the code and the model number. We can often say what it points to before the visit, though one code can have more than one cause.
| Code | What it usually means | First thing to check |
|---|---|---|
| E17 / F17 | Water is not filling, or filling too slowly | Tap open, inlet hose not kinked, inlet filter clean |
| E18 / F18 | Water is not draining in time | Drain filter, hose and pump |
| F16 | Door not detected as closed | Close firmly, check the seal |
| F21 | Drum drive problem | Remove part of the load; if it repeats, book a visit |
| F23 | Leak protection triggered, on models that have it | Unplug and look for water in the base |
Bosch uses E or F codes depending on the model series, and codes can have more than one cause. This is a general reference, not a diagnosis.
Fill and drain codes are by far the ones people ask about. Check that the tap is fully open, the inlet filter is clean and the drain hose is not kinked. If the code comes back, the inlet valve or the drain pump may need attention. Our guide to Bosch error codes goes through each code, and you can also try the error code finder.
We are an independent repair service and are not affiliated with Bosch.
Yes. We repair Bosch front load and top load automatic washers at your home across Riyadh.
E17 usually means the machine is not getting enough water, and E18 means it cannot drain. We find the cause and repair it.
The model number on the door frame or back panel, the code on the display and a short description of the fault.
Not sure what your error code means? Try our washing machine error code finder.