A washing machine that will not spin is often an unbalanced load, a drain problem or a door that is not latched. If those are fine, a worn belt, motor brushes or the control board may be to blame.
The cycle ends, and the clothes come out dripping. The drum may turn by hand, but it will not spin when it matters. Before you assume the motor has died, there are a few cheap things to rule out.
Washers are built to refuse to spin when something looks wrong. That is annoying, but it usually means the machine is protecting itself, and the cause is simpler than you fear.
On belt-driven machines, a stretched or slipped belt gives a weak or absent spin. Many newer machines have a direct drive motor and no belt.
On brushed motors these wear down over time. Slow spinning, a burning smell or sparking sounds are hints.
If the drum has no power at all, or the machine resets, the motor or board may need testing.
If the machine does not think the lid is closed, it will not spin.
If you have checked the load, the drain and the door and it still will not spin, call or WhatsApp +966 55 939 1603. A short video of the drum trying to spin helps. See our washing machine repair page.
Common causes are an unbalanced load, a drain problem, a door that is not latched, a worn belt or motor brushes. A technician can check which.
Yes. Most machines detect it and refuse to spin at speed. Spreading the clothes often fixes it.
Many older and some current models do. Many newer front loaders use a direct drive motor with no belt.
People reach this page with searches like these.