A leaking washing machine most often leaks at the door seal, the drain filter cap, a loose hose or the detergent drawer. Finding where the water starts is half the repair.
Water on the floor is stressful, and it makes everyone assume the worst. But a puddle is not always a cracked drum. More often it is one small thing that has loosened, split or overflowed.
The trick is to work out where the water comes from. Here is how to do that without taking the machine apart.
On front loaders the rubber seal collects lint and damp, and it splits with age. Check the folds for cracks and anything caught in them.
If you cleaned the filter recently, check the cap is screwed in fully. A slightly loose cap can drip steadily.
Check the connections at the tap and the back of the machine. Hand-tight is not always tight enough. Use a wrench gently on metal fittings.
Too much detergent creates foam that escapes from the drawer. It looks like a leak but is a soap problem.
Water coming from underneath that you cannot trace to anything above often means the pump housing, an internal hose or, less often, the tub. This needs a technician.
If the water comes from underneath, or you cannot find the source, unplug the machine and call or WhatsApp +966 55 939 1603. Please do not keep running it. Water near the electrics is not something to gamble on. See our repair page.
Common causes are a worn door seal, a loose drain filter cap, a loose hose, too much detergent or a failed pump housing. A technician can find which.
No. Unplug it and find the source first. Water near the electrics is a risk.
Yes, door seals are a common repair on front loaders.
People reach this page with searches like these.